Thursday, April 24, 2008

Hop to it.

Update, June 16th - This was a big hit with the hophead friends. Unfortunately, just a few days (seriously, 4 of 'em) after tapping the keg, it turned. We drank our way through most of it, so it might just be the dregs that I'm tasting, but I'll be doing a leak check on my lines just to play it safe. I don't think I'll make this one again soon just because I have too many other great IPAs to crank out (Hello, Ruination clone...thanks, BYO!)
--
It's IPA time!

Batch #12
Columbus IPA (extract)
White Labs California Ale V Yeast
--9 lbs Ultralight (LME)
--1.5 lbs Crystal 15L
--2 oz Magnum 13.1%AA (60min)
--2 oz Columbus 12.2%AA (5min)
--2 oz Columbus 12.2%AA (2min)
--2 oz Columbus (dry-hopped)
--1 Whirlfloc tab (20min)
OG: 1.062
FG: 1.017
ABV: 6%
Calc. IBUs: ~95

Steep the grains for 30 minutes in ~4 gallons water, bring to 6 and boil. Wort chiller knocked it down to ~65 in 45 minutes. Dry-hopped more Columbus in secondary after 10 days primary (slow fermentation around 60F). Vanguard whole hops?

I lost a lot of volume on this one. In the fermenter it's maybe only 4 gallons. Off to a slow start - the heater was off because it's been nice out. One should know California better...nights in the high 40s to low 50s. The heater is back on to keep the fermentarium nice and warm at 65ish through the night.

Wednesday, April 16, 2008

Blackberry Stout the Second

Update: So tasty. So very, very tasty. Roasty toasty malt flavor with just enough berry flavor for it to be recognizable but not overpowering. Will definitely go for round 3 on this one.
---
The old blackberry stout was such a hit after it aged for a couple months that I thought I'd try it again. This time, instead of spending nye $30 to have the berry puree shipped from Maryland (seriously, it's the one berry that MoreBeer doesn't supply), I spent about $10 at Trader Joe's for berries. The stout kit I used as a base last time has changed a little (hop shortage, anyone?), and we left out the gypsum, since that just made the beer chalky and is primarily for mash water adjustment, anyway. The main difficulty of the method I used was that I didn't have a sanitized strainer on hand to scoop my berries out of the wort. This meant that I clogged the spout on my bucket and had to pour from the bucket into a funnel. That actually went surprisingly well with an extra pair of hands to help. The only other issue was the berries clogged the funnel at the end of the pour, and I had to hop (as in a grain hopper, not as in hops) the funnel so the berries would fall through.

Batch #11
Blackberry Stout 2 (extract), Irish Ale Yeast (White Labs 004)
--7+ lbs Ultralight Malt Extract
--1 lb Crystal 40L
--8 oz Black Roasted
--4 oz Black Patent
--4 oz Chocolate Malt
--1 oz Glacier 6.0%AA (60min)
--1 oz Glacier 6.0%AA (1min)
--5 lbs Frozen Blackberries (~10min)
--1 Whirlfloc tab (20min)
OG: 1.054
FG: 1.013
ABV: 5.4%
Calc. IBUs: ~25

Steep grains 30 minutes in 4 gallons water at 160±10ºF, add water to 6 gallons, bring to boil. Add extract and 1 oz Glacier. At 20 minutes, toss in clarifier. At 10 minutes, dunk in chiller and berries. I'd recommend bringing the berries up to at least room temp first, as the cold berries set my boil back about 10 minutes. More hops at 1 minute. Chill. Ferment. Secondary after 1 week to get the beer off the berries. After bottle/keg, give it one month to condition, drink within four months.

Monday, March 10, 2008

Strong beer and sticky floors

Updated 8/14 - Bottled. Finally. After giving this one a swift kick in the pants with a new batch of yeast, it's finally in the bottles. Of course, now I'm paranoid about bottle bombs. Hopefully everything will survive and some of the weird flavors will settle down by October or November.
--

Updated 3/30 - Racked to secondary. SG still high (around 35), but I think once that falls some more, this will be tasty. I've put it back near the heater to try and keep the yeast active...will think about adding some more to give it a little shove. If it weren't so damn sticky, I'd be pretty happy with the 8+%ABV it's at now, but I want that 10%.
--

I brewed a big beer yesterday as a demo for a friend thinking about starting the habit. This is one a made up, so hopefully it'll be tasty. I plan to let it secondary for a while and then cellar in bottle for a few months.

Batch #10
"Decathalon" Barleywine (Partial mash)
Super High Gravity Ale Yeast (White Labs 099, two vials instead of a starter)
--11 lbs Ultralight LME
--~2.5 lbs Light DME
--1 lb Caravienne
--1 lb Crystal 75L
--1 lb CaraPils
--8 oz British Chocolate
--8 oz Orange Honey
--2 oz Newport 9.3% (60min)
--2 oz Simcoe 10.4% (10min)
--2 oz Columbus 12.2% (5min)
--1 Whirlfloc tablet (20 min)
OG: 1.098-1.100
FG: <1.030
ABV: 9+%
IBU: ~75-80

Mashed the grains around 165 for 45 minutes, sparged a little over two gallons to get a total of ~3 gallons wort at a gravity of about 20. Added water and DME, brought to a boil. Added 6lbs LME and Newport after hot break. Added the remaining LME and the Simcoe at 10 minutes, Columbus at 5, chilled to 70F or so in about 30 minutes. Fermenting at 65F, lag time was about 8-9 hours. It's cool enough so that I didn't lose any beer out the airlock. The yeast should bring this to about 10% ABV.

Monday, March 3, 2008

Where's a live grenade when you need one?

Updated 3/30 - Kegged. Strong, delicious. Can't wait for tapping time.
---

As revenge for doing an entry level brew last week, we did a partial mash last night. I still have yet to get the volume of water right for this process, as I ended up with far less than the target 3 gallons of wort from the mash. I know part of it is that the bottling bucket with a grain bag isn't the best lautering system in the world. I also don't have a spare kettle large enough to heat the 2+ gallons for sparging if I want a collection vessel. The centennial hops smelled pretty good, but I'm not so sure about the rye...I had my first rye beer a couple days ago and I wasn't that impressed. Hopefully it will be balanced well enough by everything else that's in...

Batch #9
"Fire in the Hole" (MoreBeer MiniMash Kit355)
English Ale Yeast (White Labs...1 L starter using 1 cup light DME)
--7 lbs Ultralight LME
--2 lbs 2-row
--1 lb Flaked Wheat
--1 lb Crystal 75L
--8 oz Rye
--8 oz Munich
--2.8 oz Carafa
--1 oz Magnum 13.1% (60min)
--2 oz Centennial 10.4% (5min)
--1 Whirlfloc tablet
OG: 1.067
FG: 1.015
ABV: 6.8%
IBU: ~56

The target gravity ranged up to 1.075, so I tried making a starter. Boiled 1 cup of light DME in 1 liter of water for 10 minutes, let it cool, and pitched my yeast with a teaspoon of fermaid K. It built up a nice layer of yeast at the bottom and was still active when I chilled it to knock the live cells out of solution so I could pour off the top half-liter or so before pitching to primary. I used an empty vodka bottle, largely because I felt I could skip sanitizing something that lived in the freezer and contained 40% alcohol. If I had any doubts, the batch is bubbling away right now.

As always, the Fonz was in for the last 10 minutes of the boil, and I still haven't tasted copper in any of my conditioned brews.

Saturday, February 23, 2008

The Ocho

Updated 3/22 - Kegged. FG is a little high, but the fermentation looked like it's still active. Hopefully it'll settle down over the next few weeks. On the plus side, the beer was pretty tasty despite its simple recipe.
--

For my eighth brew, I whipped up a batch of the MoreBeer Belgian Trippel. Nothing fancy. Extract and candi sugar. No specialty malts or anything. Yet somehow it still took me just as long to brew. Probably due to the imprecise measurement of water for the boil, which resulted in the pot having almost 7 gallons after adding the extract, which resulted in me sitting there in the kitchen watching for boilovers while I waited for a gallon or so to leave. In the end I still had a little too much water (OG 1.070 instead of the target 1.075-1.080), but meh.

Batch #8
Belgian Trippel (MoreBeer Extract Kit)
Abbey Ale Yeast (White Labs P530)
--6 lbs German Pilsner LME
--3 lbs Light DME
--1 lb Clear Belgian Candi Sugar
--1 oz Vanguard 4.4% (60min)
--1 oz Sterling 5.0% (1min)
--1 Whirlfloc tablet
OG: 1.070
FG: 1.020
ABV: 6.5%
IBU: ~15

Pitched a little warmer this time, at about 75ºF. The recipe suggests fermenting at 70ºF for clean taste with less heavy alcohol, or in the mid-70s for more yeast emphasis. They suggest trying the other Belgian yeasts for different flavors. In the end, this should get us a nice 7% trippel-style ale. It's a nice golden color. I anticipate secondary in about a week, bottle in three or four weeks instead of kegging so we can see how it matures over the next several months to a year.

Saturday, February 16, 2008

Bottling and Kegging

My fermenters are empty. The lady's Multibrown is sweet, but will be good in a few months, I suspect. The champagne yeast did about nothing to it, but after some conversation (over beer, of course) with the brew shop guys, between the recipe and the east coast yeast used, this is normal. The red is hoppy, delicious, and in a keg. The Guinness clone is not the right color, but has some of the right flavor notes. Again, hoppier than I wanted (my fault for being a dumb-dumb). Also kegged. St Pat's party in a month, here I come with a nearly complete kegerator.

Thursday, January 24, 2008

Fresh out of empty fermenters.

The St Patty's beers are both fermenting away now. I used a Guinness Draught clone recipe that I found for the stout. I made a few changes to work with what was available in terms of ingredients and time. Original here.

Batch #7
"Guinness Draught Clone" Dry Irish Stout
Irish Ale Yeast (White Labs P004)
--4 lbs Ultralight Malt Extract (liquid)
--2 lb Flaked Barley
--14 oz British Roasted Barley
--21 oz soured stout(15min)
--1 oz Santiam 5.8%AA (60min)
--2 oz Kent Goldings 5.5%AA (30min)
--1 Whirlfloc tablet (15min)
OG:
FG: 1.010
ABV: ~3.7%
Calc. IBUs: 52

Flaked barley steeped from cold up to 175F (giving ~20 minutes between 150 and 170), allowed to rest for ~30 minutes as temp fell to 160 and roasted barley was added. Extract and first hop after hot break. Yielded 5 gallons in the fermenter. My hydrometer is still hanging out with the Malty Brown, so no numbers there yet (should be ~1.038 if the "mash" was 75% efficient; and, yes, Guinness is a low OG beer).