Monday, January 18, 2010

Rye!

Update 3/11 - SG 1.017. Kegged with 1.75oz table sugar.
Update 3/1 - SG 1.020.
Update 2/14 - SG 1.024 and has been for a few days. Racked to secondary and fermentation jump started with WLP001 (1L starter, crashed, decanted, repitched into a second 1L starter to proof).
--

One of my goals for this sack o' grain was to make a barleywine that doesn't suck. Then I got to thinking. Wouldn't a ryewine be kind of fun? Turns out I'm not the only one who thought so. I've heard of recipes ranging from 20-50% rye. I went for a solid 24% rye with 8% wheat. Shouldn't be overwhelmingly spicy, but I expect it will have enough potency to balance the caramel and honey flavors from the specialty grains. This recipe maxes out my mash tun. Rumor has it there's a fantastic oatwine out there that includes a hefty 60% oat malt bill.

Batch #53
Ryewine
--15lbs 2-row RAHR
--6lb Rye Malt
--2lb White Wheat Malt
--12oz Crystal 60L
--8oz Crystal 75-80L
--6oz Honey Malt
--4oz Crystal 40L
--2oz Crystal 120L
--4oz Rice Hulls
--1/2 tsp gypsum (infusion water)
--2oz Magnum 14.4%AA (60min)
--1oz Mt Hood 5.2%AA (30min)
--1oz Mt Hood 5.2%AA (15min)
--1oz Mt Hood 5.2%AA (5min)
--1oz Mt Hood 5.2%AA (1min)
--Whirlfloc (15min)
--1/4 tsp fermaid k (15m)
--WLP002 English Ale Yeast, 1.5C slurry from stout
OG: 1.100
FG: 1.017
ABV: 10.9%
IBU: ~75

Mash in with 29 qts water to 146F. This gives a decent water/grain ratio of about 1.15, and fills my 10gal cooler mashtun almost to the brim. The low mash temp is to make sure that I don't end up with a finished product that's cloyingly sweet. Bonus: 146F is within the range of protease activity, so the rye gets a decent treatment. Nice big thermal mass, the temp stays the same for a solid 90m mash (no wind either...too wet outside, so I was in the kitchen). Fly sparge with 10qts water at 170F. Ideally, more sparge water is needed, so my efficiency suffered some (59%), but I was running into the limits of my kettle, and with the crystal malts, I didn't want to boil too long. 60m boil, hops as noted. Cool to ~60F, pitch yeast, ferment in low 60s (don't want too much of the esters from the yeast...just a hint). I may have to add more yeast later, say after a week or so rack and pitch active WLP001 or something else hungry. That way I don't stress the english yeast too much and don't have to worry about sitting on trub and dead yeast while the ferment completes.

Sunday, December 27, 2009

I see your Schwartz is as big as mine.

Update 3/18 - I think they liked it. Tapped for a St Paddy's party yesterday, just a bit of foam when I reached for *my* first pint of the stuff tonight. Maybe I should brew bigger batches.
--
Update 1/18 - Okay, the gravity hasn't changed in a while, we're just done at 1.018. A little high, but whatever. I'll empty out a keg and pop this in the lager fridge in the next day or so.
--

Nice black lager. I think this is another one of Jamil's recipes. Or at least I took inspiration from it. Not too roasty. It's a trick, really. Looks and smells like a big roasty thing, but comes through much softer. The carafa is nice because it's been dehusked, giving a less harsh roast character than other forms of roasted barley. WLP800 isn't necessarily the best choice - it's supposedly from Pilsner Urquell - but it's what I have and I didn't feel like making a starter of German yeast last week.

Batch #52
Schwartzbier
--8lbs Pils
--2lb Munich
--0.42lb Chocolate
--0.58lb Carafa II
--0.5lb Crystal 40L
--0.5lb Melanoidin
--0.5oz Perle 7.5%AA (60min)
--0.5oz Perle 7.5%AA (45min)
--0.5oz Perle 7.5%AA (20min)
--0.5oz Perle 7.5%AA (0min)
--Whirlfloc (10min)
--WLP800 Pilsner Lager Yeast, slurry from pilsner
OG: 1.062
FG: 1.018
ABV: 5.5%
IBU: ~25

Mash in all grains except chocolate and carafa at 154F, hold for 30m. Stir in dark grains, mash temp falls a bit, hold for 30m. Batch sparged (again didn't get as much extracted as I thought I would...). Used a 75m boil to compromise between the DMS issue and the low extraction volume. Chilled to 50F, pitched yeast.

Wednesday, December 23, 2009

Because wine ought.

Update 1/30 - Bottled. Ended up with 23 bottles. Floor corkers are wonderful.
Update 1/12 - SG 0.995. Metabisulfite, sorbate, fishguts added. Stirred to degas...will use drill next time.
Update 1/10 - SG 0.995
Update 12/31 - Damn it. I racked into the wrong size carboy and had to dump a gallon of wine. Oh well. SG was 1.009 today.
--

Mead bottled.

I "made" "wine" today. By which I mean I mixed some cat litter, grape juice, and water, and then sprinkled yeast on top. Seriously, it took longer to sanitize everything than to actually mix the must up. I'd like to try starting with grapes at some point, but really...why? This was super easy, and short of growing my own grapes, it doesn't seem like there's too much room for improvement on the grape end of things. I could be wrong. What do I know?

Wine Batch #01
Vintner's Reserve Pinot Noir
OG: 1.075 (18.2 Brix)
FG: 0.995
ABV: 10.5%

Follow the kit instructions. So far, that's mix 10g bentonite with 2L hot water, add 10L juice, dilute to 23L, and add yeast (Red Star Premier Cuvée, included in kit). Still, I had fun. I'm excited about having 30 bottles of home wine to hand out to people.

Sunday, December 20, 2009

Hey.

The lady's little sister heard such nice things about this one, that she requested it be around when she visits. She'll be here in about three weeks, so it's a little rushed, but here we go again.

Batch #51
'bout Damn Time Oatmeal Stout
--9.75lbs Pale
--1lb Flaked Oats
--1lb Flaked Barley
--0.75lb Pale Chocolate
--0.75lb Victory
--0.5lb Crystal 75L
--0.5lb Black Roasted Barley
--2oz Willamette 4.9%AA (60min)
--whirlfloc (10min)
--WLP002 English Ale Yeast, 1.5L starter
OG: 1.060
FG: 1.018
ABV: 5.5%
IBU: ~25

Single infusion 154F for 60m in 18qts water.
Batch sparge with 16qts to collect about 6.5 gallons.
Fermenting at 64F, so probably going to miss some of the esters from that yeast. I'll probably have to swirl the fermenter a few times to keep the yeast going, too.

Friday, December 18, 2009

That's a bit more like it.

Did the mash and sparge/lauter work on a 7 bbl brew yesterday. Had to take off before the first hop addition, but still. =)

Saturday, December 12, 2009

Fifty!

Batch #50
Bohemian Pilsner
--8lb German Pils
--9oz CaraPils
--9oz American Munich
--3.9AAU Saaz 3.9% (60m)
--3.9AAU Saaz 3.9% (45m)
--3AAU Saaz 3%, whole (30m)
--3AAU Saaz 3%, whole (10m)
--whirlfloc (10m)
--pinch gypsum in mash
--WLP800, 2L starter
OG: 1.046
FG: 1.009
ABV: 4.8%
IBU: ~30-35

Meant to mash 60m at 154F, ended up mashing in to 158, dropping to 145, raising to 150, and holding for 45 more minutes. Used a 90m boil, ended up with just about 5 gallons exactly in the bucket. Probably 4.5-4.75 in carboy. This is what happens when you brew outside in the rain on a cold day and screw up the mash. Oh well. Smells good.

Monday, November 9, 2009

Half barrel brew

Update 12/09: Rumor is this has been filtered, carbonated, and kegged. I should be bringing some home and find the FG/ABV soon enough.
--

So, this is a different. I brewed a 20 gallon extract batch at Devil's Canyon using their brew-on-premise system. It sounds like after filtering and transfers I should get about 15 gallons out at best. The gravity is a little higher than I was planning for, but it'll be okay. That's why it's an "imperial mild". This is the Dark Mild recipe from Brewing Classic Styles scaled up by a factor of 4.5 instead of the 3.3 for going by just volume...hence "imperial". I added the Fuggles to give it a little more complexity. We'll see how it turns out. The recipe is a lot darker than I was hoping for, but that's my fault for scaling up the black malt...I would have liked something closer to a deep ruby color. There's always next time.

Batch #49 (20 gallons)
Imperial Dark Mild
Brown Ale
--7L (~22lbs) Golden Light LME (Briess)
--2.25lb Crystal 60L
--27oz Crystal 120L
--18oz Brit Pale Chocolate
--9oz Brit Black Malt
--18.2AAU Kent Goldings 5.2% (60m)
--4.8AAU Fuggles 4.8% (30m)
--whirlfloc (15m)
--WLP002, yeast cake from batch 48
OG: 1.050
FG:
ABV:
IBU: ~25

Steeped the grains for 30 min with temperature ranging from 145F at start to 163F at finish. Normal 60m boil with all extract added at the start. Fermenting around 68-70F.