Friday, August 22, 2008

Wat.

Update 9-4 - Kegged. Cleared the keg with CO2, racked, set seals, put in fridge at 40F with 10psi. Also, very tasty, with a nice aroma.
--
Update 8/28 - Racked to secondary. 1.5oz Willamette added. Tastes great. Will keg in a few days.
--

I brewed up a batch of St. Rogue Red Ale clone last night. I made a bittering hop substitution since the shop was out of Chinook. An ounce of Magnum gave me a slightly higher AAU than the recipe called for. That in combination with the faster evaporation rate than expected led me to do a 75 minute boil instead of 90. The problem, though, is that my gravity came out 10 points shy. TEN! Even more irritating is that the hydrometer reading actually dropped between lauter and flame out. So my initial mash gravity reading of 1.043 (which would be perfect!), was probably high due to stratification in the collection vessel (despite my efforts to stir it around). This means that my overall efficiency is low...back to the books, eh?

Batch #19
St. Rogue (with substitutions)
--7 lbs 2-Row American Pale Ale Malt (RAHR)
--1 lb Dark Munich (recipe calls for "Munich", but this smelled tastier)
--1 lb Crystal 15L
--1.25 lbs Crystal 40L
--1 lb Crystal 75L
--1 oz Magnum 13.1% AA (75min)*
--1 oz Centennial 10.4% AA (2min + whirlpool)*
--Whirlfloc (15min)
--White Labs WLP001 California Ale Yeast (1L starter)
OG: 1.040 [target 1.052 >:( ]
FG: 1.010
ABV: 4%
Calc. IBU: 45ish

*Recipe calls for ~ 10AAU Magnum for 90 minutes, and ~ 10AAU Cent. in whirlpool or hopback

Mashed grains for 60 minutes at 155F. Sparged with water at 168-170, extracting 6.5gal. The recipe calls for 6 gallons wort + 0.5 gallons water. I thought that was stupid.

At flame out, I removed the bittering hops, gave the wort a whirl with the Centennial. Chilled to about 70, and pitched just the slurry from my starter. Lag time of more than 3 but fewer than 10 hours (I sleep sometimes). I'll likely secondary with the leftover Willamette from the pumpkin brew to give it some more hop aroma.

Thursday, August 21, 2008

Vonnegut plus two.

So, now that I've actually read Slaughterhouse V...

No, of course there are no real parallels to this little operation. I simply translated the name of a street to English. Now, back to Trafalmadore.

Sunday, August 3, 2008

It's pie time I brewed this.

Update 8/14 - Bottled. Spices are good, pumpkin flavor is a little mild. I think I'll add that a little differently for the next round. In other news, I'm done with WLP007. I don't really want a FG below 1.010. I didn't even really want that yeast, but am too impatient to wait for the Los Altos B3 shop to get the right strains in stock.
--

I was advised to try brewing Old Pumpculiar, as everyone that has made it seems to love it, and I'm looking for a good pumpkin brew for the fall. So, it being August, I decided to give it a go. I figured that if this is ready by September, that gives me plenty of time to decide on changes before the Halloween edition.

Batch #18
Old Pumpculiar (with substitutions)
--8 lbs 2-Row American Pale Ale Malt
--1 lb Flaked Wheat
--2/3 lb Crystal 75L*
--8 oz Cane Sugar
--8 oz Molasses
--75 oz Canned pumpkin* (in mash)
--1 oz Glacier 6% AA (60min)*
--0.5 oz Willamette 4.6% AA (15min)*
--Whirlfloc (15min)
--1 Tbs Pie spice* (15min at flameout)
--White Labs WLP007 Dry English Ale Yeast
OG: 1.046
FG: 1.006
ABV: 5.2%
Calc. IBU: 23

*Substitutions and changes. I added cloves to the pie spice because they belong there.

Mash grains and pumpkin (fresh or canned) at 153F for 60 minutes. I collected 6 gallons of wort, which makes for a slightly small batch. I'd recommend 6.5 gallons. My OG was about 10 pts low - I think due to over sparging during lauter. [I ended up making closer to 7.5 gallons of wort and not collecting all of it. The mistake: submerged hose tricked me into thinking I needed more water in the tun. So, my efficiency was low (really low...like 50-60%) unless I use the 7.5ish estimate which puts me right around 75%.]

Add hops and sugars at the appropriate times during the boil. Add the spices at flame-out and rest for 15 minutes before chilling. I used yeast from a 2L decanted starter. Good kraeusen when I checked about 10 hours after pitching.

Sunday, July 13, 2008

Retirement Plans

I think I've spent enough money at MoreBeer to warrant them giving me a 401(k) plan that matches my investment in their products. They had their annual 15% off sale yesterday, and, so help me, I may have upgraded my mash tun. You see, the homemade 5 gallon water-cooler mash tun works great for low to normal gravity beers in a 5 gallon batch. Sounds great, you say? It is!
...
But?
...
Yes, but, not so great for high to very high gravity beers. I ran into the problem with brew 17, the Ruination clone. Anything above an original gravity of say, 1.06 becomes difficult due to the thick mash required to fit all the grain in the cooler. My water ratio was about 1:1 quarts water to pounds of grain, and temperature maintenance was trouble because the top of the cooler didn't fit on all the way. I think I managed to semi-rescue this delightful double-IPA with the extract and sugar additions, but I wasn't happy about it. So, I resolved to improve my arsenal. After a couple weeks of looking, I discovered that I would save a whopping $5 by building my own 10 gallon tun ($50 cooler, $34 false bottom, $30 in fittings, etc., +tax) compared to buying one new at a 15% discount ($128 after tax). Not worth the time and gas. And, why the hell not, another keg. As a result, I am trying to sell my old mash tun and avoid the store for a few weeks to save some dollars. Also, the guy recognized my voice on the phone. Definitely time for a break.

Sunday, July 6, 2008

Ruin(ed?)ation

Updated 7/31/08 - Well, it's not Ruination. But it's pretty good anyway.
--

Five gallon mash tuns are a funny thing. They work great. They really do. So long as you're mashing less than about 14 pounds of grain. But when you want to mash 15.6 pounds for an OG of 1.075, your water to grain ratio quickly falls to almost one quart to a pound. The first lauter had a great SG of about 1.08, but I had to batch sparge twice to get the seven gallons needed for a 90 minute boil. My initial boil gravity came out to about 1.052. I added some corn sugar and DME to boost it a little bit and wound up with an OG of 1.065 after the boil. Even with the target FG of 1.010, this is going to be a little weaker in alcohol than we were shooting for. Between all of that mess and some hop substitutions, well, we'll see...

Batch #17
Stone Ruination Clone - "Rumination" (so Brad can say it right). Recipe from BYO's 150 Clones special issue.
--14.6 lbs 2-row
--1 lb Crystal 15L
*--8 oz Corn Sugar
*--1 cup Light DME
--36 AAU Magnum (60min); *I used 4 oz of 9.3% Newport
--15.7 AAU Centennial (Steep 5min at flame out); *2oz 6% Cascade pellets + 1oz 7.4% Cascade whole
--2 oz Centennial (Secondary 3-5 days); *2 oz Cascade
--Whirlfloc (20min)
OG: 1.065 [1.075 target]
FG: 1.008 [1.010 target]
ABV: 7.1% [7.7% target]
IBU: ~120 [100+ target]

*My subs and fixes

Mash grains at 149°F for 60 minutes, 90 minute boil. My mash was funky because of the capacity of my mash tun. I extracted 1 gallon after an hour, and pulled out 6 more over the next hour. I had lots of temperature fluxuation due to heat loss out the top (no tight seal when it's that full) and hot water additions combined with difficulty stirring such a thick mash. Moral of the story: 10 gallon mash tun for OGs over about 1.065. Racked to secondary after 8 days. Cascade added. Kegged after 5 days.

Wednesday, July 2, 2008

Sweet 16th

I do admit I was intrigued by a recipe for DuClaw Vanilla Bean Oatmeal Stout. I like oatmeal stouts, and I like vanilla. It seems like this should be an easy gap to bridge. When talking about it with some friends, someone said "put chocolate in it - vanilla and chocolate are always separate". Not always, but it sounded like a good idea, so I borrowed some tips from a clone recipe of Young's Double Chocolate Stout and threw in a little lactose and cocoa powder. In the end, this might be more like drinking a milk shake, mouthfeelwise, anyway. The cocoa is of course unsweetened, and the vanilla should just add aroma.

Batch #16
Chocolate DuClaw Vanilla Bean Oatmeal Stout
--9 lbs 2-Row American Pale Ale Malt
--17 oz Black Roasted Malt
--1.25 lbs Flaked Oats
--6 oz German Chocolate Wheat
--6 oz Crystal 60L
--8 oz Lactose
--4 oz Cocoa Powder (15min)
--3 vanilla beans (secondary)
--2 oz Kent Goldings 4.5% AA (60min)
--Whirlfloc (20min)
--White Labs WLP007 Dry English Ale Yeast
OG: 1.052
FG: 1.013
ABV: 5.1%
Calc. IBU: 24

Mash all the grains for one hour at 152°F. I added 1 tsp gypsum to the mash water. Collect 6.5 gallons of wort. My efficiency was around 72%, giving me a gravity of 1.048. Add the lactose and boil. Add the hops. At 20 minutes remaining, add the clarifier and dissolve the cocoa in hot water. Add the cocoa to the boil with 15 minutes left. Flame out, hops out, start chillin'. I pitched the yeast slurry from a 1 pint starter. Dry English wasn't my first choice, but it'll do. Spent 1 week in primary. Three beans added at secondary, kegged after 5 days (a little rushed on everything because I was juggling with brew 17).

Tuesday, June 3, 2008

Do the mash.

Well, I've now brewed my first all-grain recipe. I built a mash/lauter tun out of a 5 gallon cylindrical water cooler, a stainless steel false bottom, and the following (inside to out):

3/8" hose barb to 1/2" MIP
1/2" FIP to 3/4" male hose
3/4" female hose to 3/4" MIP
(Cooler wall)
#17 rubber O-ring (#15 would have been better)
3/4" ID washer (2" OD, milled to 1.75" to fit the cooler)
3/4" FIP to 1/2" FIP reducer
1/2" x 1.5" MIP nipple
1/2" ball valve (threaded 1/2" FIP both sides)
3/8" hose barb to 1/2" MIP

Toss in some vinyl hose, teflon tape, and a trio of clamps, you've got yourself an all-grain setup. It's fun to build, but not really worth the time. I spent about $75 ($20 for a new cooler, $25 for the false bottom, $30 for other parts), which is only about $10 less than a new complete assembly from MoreBeer.

For my first recipe, I borrowed Jim Rossi's Honey Pale Ale from MoreBeer's library.

Batch #15
Jim Rossi's Honey Pale Ale
--7 lbs 2-Row American Pale Ale Malt
--8 oz Honey Malt (Crystal 25L)
--3 lbs Honey (15min)
--0.5 oz Cascade 7.4% AA (60min)
--0.5 oz Cascade 7.4% AA (1min)
--Whirlfloc (20min)
--White Labs WLP001 Calif. Ale Yeast
OG: 1.054
FG: 1.004!!!
ABV: 6.5%
Calc. IBU: 15ish

Mashed 1 hour at 152°F with 2 quarts per pound. Batch sparged to 6 gallons. Mash gravity was 1.035. My calculations bring that to about 74% efficiency. I used whole hop leaves for this one.